Select observation definition to view

2
1
SWI_2D_MAP_FS_V1Same as SWI 2D MAP PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink.SWI
SWI_2D_MAP_OTFSimilar to SWI 2D MAP PS, but using an on-the-fly recording sequence, i.e. the OFF position per map row is only observed once.SWI
SWI_2D_MAP_OTF_CCH_V1Similar to SWI 2D MAP PS, but using an on-the-fly recording sequence, i.e. the OFF position per map row is only observed once.SWI
SWI_2D_MAP_OTF_V1Similar to SWI 2D MAP PS, but using an on-the-fly recording sequence, i.e. the OFF position per map row is only observed once.SWI
SWI_2D_MAP_PS_V1This is a multi-purpose mode that can be used on any science target for any 2D mapping, and meridional or zonal rasters. This mode will also be used for calibration purposes (e.g. pointing). The number of rows and columns and the stepsize of the raster map is adaptable to the target angular size. Jupiter: Investigation of the global and regional stratospheric composition and temperature of Jupiter, and pointing calibration. For 2D maps, meridional scans and zonal scans, two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding). Moon monitoring: Investigation of the spatial distribution of Galilean moons atmospheric species (+ monitoring), and calibration. Two CTS spectra are recorded for 60 seconds over 210 channels (16 bits coding). Flybys: Mapping of Galilean Moons’ surface properties and atmospheric composition, temperature, and winds. Two CTS spectra are recorded for 30 seconds over 210 channels (16 bits coding). GCO: (1) Investigation of Ganymede’s atmospheric composition, temperature, and winds, and surface properties by scanning from limb to limb with the along-track mechanism across the ground-track using the antenna mechanism ( 72 ). Two CTS spectra are recorded for 10 seconds over 130 channels (16 bits coding). (2) Tomographic investigation of Ganymede’s atmospheric and surface composition, temperature, and winds by scanning along-track from 30km to +30km of the nadir axis with 9 steps, using the rocker mechanism ( 4.3 ), and with 1.5 sec integration time for two CTS spectra over 130 channels (16 bits coding). In all cases, two CCH measurements (20 bits coding) are recorded for 0.1 second. During GCO, this implies that two CCH measurements are separated by 1/2 beam at 1200 GHz. Position-switch calibration method (the OFF position is observed after each ON of the map is observed).SWI
SWI_5POINT_CROSS_FS_V1Same as SWI 5POINT CROSS PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time onsource. For Jupiter, two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding). For moon monitoring, two CTS spectra are recorded for 30 seconds over 210 channels (16 bits coding). For both cases, and in parallel, two CCH measurements (20 bits coding) are recorded for 0.1 second. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink. Frequency-switch calibration method for CTS data.SWI
SWI_5POINT_CROSS_PS_V1Investigation of the Jovian and Galilean moon atmospheric composition, and Galilean surface properties by means of rough raster mapping. The stepsize is such that the opposite ends of the cross are separated by the size of the target in the given direction. For Jupiter, two CTS spectra are recorded every 60 seconds over 10000 channels (16 bits coding). For moon monitoring, two CTS spectra are recorded every 30 seconds over 210 channels (16 bits coding). For both cases, and in parallel, two CCH measurements (20 bits coding) are recorded every 0.1 second. Position-switch calibration method.SWI
SWI_ALLAN_ACS_FSAllan variance characterization of the ACS 1 & 2 by integrating on the cold sky. Integration time is 1 s. Frequency-switch calibration method.SWI
SWI_ALLAN_CTS_FSAllan variance characterization of the CTS 1 & 2 by integrating on the cold sky. Integration time is 1.5 s. Frequency-switch calibration method.SWI
SWI_ALLAN_TOTAL_ACSAllan variance characterization of the ACS 1 & 2 by integrating on the cold sky. Integration time is 1 sSWI
SWI_ALLAN_TOTAL_CCHAllan variance characterization of the CCH 1 & 2 by integrating on the cold sky. Integration time is 0.1 s.SWI
SWI_ALLAN_TOTAL_CTSAllan variance characterization of the CTS 1 & 2 by integrating on the cold sky. Integration time is 1.5 s.SWI
SWI_DIAGNOSTICDiagnostic activity is allowed in this mode, including activation and control of sub-units, and service 6.SWI
SWI_JUP_LIMB_RASTER_FS_V1Same as SWI JUP LIMB RASTER PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink.SWI
SWI_JUP_LIMB_RASTER_PS_V1Investigation of Jupiter’s stratospheric winds, temperature and composition, targeting one (or more) molecular line(s) at the planetary limb with a 3  resolution in latitude. The investigation of Jupiter’s stratospheric dynamics (winds) requires measuring the Doppler shifts induced by zonal winds on strong lines. The observations require a very high signalto- noise ratio ( 100) and a very high spectral resolution (100kHz). Similar requirements for the investigation of Jupiter’s stratospheric chemical inventory and temperature as a function of latitude. At each limb position, a short  10-point across-limb scan of the continuum emission is performed with the CCH to derive a posteriori the instrument pointing. Two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding), and two CCH measurements (20 bits coding) are recorded for 0.1 second. Position-switch calibration method.SWI
SWI_JUP_LIMB_STARE_FS_V1Same as SWI JUP LIMB STARE PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink.SWI
SWI_JUP_LIMB_STARE_PS_V1Investigation of Jupiter’s stratospheric composition and temperature by targeting one (or more) molecular line(s) at the planetary limb. The retrieval of vertical profiles require a very high signal-to-noise ratio ( 100) and a very high spectral resolution (100kHz). A coarser spectral resolution (i.e. 500kHz) is sufficient for detections. This mode is nominally meant for deep integrations and implies numerous repetitions. A short  10-point across-limb scan of the continuum emission is performed with the CCH to derive a posteriori the instrument pointing. Two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding), and two CCH measurements (20 bits coding) are recorded for 0.1 second. Position-switch calibration method.SWI
SWI_MECHANISMCheck of mechanism response to commands. Integration time on the CTS is 10 seconds.SWI
SWI_MOON_LIMB_SCAN_FS_V1Same as SWI MOON LIMB STARE PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. Flyby: Two CTS spectra are recorded for 30 sec over 210 channels (16 bits coding). GCO: Two CTS spectra are recorded for 30 sec over 130 channels (16 bits coding) and a different altitude (5, 10, 20, 40, and 50 km) is scanned every orbit. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink.SWI
SWI_MOON_LIMB_SCAN_PS_V1Investigation of Galilean Moons’ atmospheric composition, temperature, and winds. Flyby: The atmospheric limb is rapidly scanned to achieve 5km vertical resolution. Two CTS spectra are recorded for 1.5 sec over 210 channels (16 bits coding). GCO: The atmospheric limb is scanned up and down rapidly with 10 km altitude steps and with 1.5 sec integration time for two CTS spectra over 130 channels (16 bits coding). Position-switch calibration method.SWI
SWI_MOON_LIMB_STARE_FS_V1Same as SWI MOON LIMB STARE PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. Flyby: Two CTS spectra are recorded for 30 sec over 210 channels (16 bits coding). GCO: Two CTS spectra are recorded for 30 sec over 130 channels (16 bits coding) and a different altitude (5, 10, 20, 40, and 50 km) is scanned every orbit. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink.SWI
SWI_MOON_LIMB_STARE_PS_V1Investigation of Galilean Moons’ atmospheric composition, temperature, and winds). Flyby: Two CTS spectra are recorded for 30 sec over 210 channels (16 bits coding). GCO: Two CTS spectra are recorded for 30 sec over 130 channels (16 bits coding) and a different altitude (5, 10, 20, 40, and 50 km) is scanned every orbit. Position-switch calibration method.SWI
SWI_MOON_NADIR_STARE_FS_V1Investigation of Galilean Moons’ surface properties and atmospheric composition, temperature, and winds, and surface properties. This mode can also be used to characterize surface polarization by pointing 45 off-nadir, after rotating the S/C by 90 around its nadir axis. It can also serve for solar occultation experiments to observe a weak molecular line in the atmosphere of Jupiter, a Galilean Moon, or the Europa torus. Flyby: Two CTS spectra are recorded for 30 seconds over 210 channels (16 bits coding). GCO: Two CTS spectra are recorded for 10 seconds over 130 channels (16 bits coding). In both cases, two CCH measurements (20 bits coding) are recorded for 0.1 sec, so that they are separated by maximum 1/2 beam at 1200 GHz. Solar occultation: Two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding), and two CCH measurements (20 bits coding) are recorded for 0.1 second. Position-switch calibration method.SWI
SWI_MOON_NADIR_STARE_PS_V1Investigation of Galilean Moons’ surface properties and atmospheric composition, temperature, and winds, and surface properties. This mode can also be used to characterize surface polarization by pointing 45 off-nadir, after rotating the S/C by 90 around its nadir axis. It can also serve for solar occultation experiments to observe a weak molecular line in the atmosphere of Jupiter, a Galilean Moon, or the Europa torus. Flyby: Two CTS spectra are recorded for 30 seconds over 210 channels (16 bits coding). GCO: Two CTS spectra are recorded for 10 seconds over 130 channels (16 bits coding). In both cases, two CCH measurements (20 bits coding) are recorded for 0.1 sec, so that they are separated by maximum 1/2 beam at 1200 GHz. Solar occultation: Two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding), and two CCH measurements (20 bits coding) are recorded for 0.1 second. Position-switch calibration method.SWI
SWI_NADIR_STARE_FS_V1Same as SWI NADIR STARE PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. If the purity of the spectral band is good enough, there is an option to pre-compute ON-OFF for the CTS before downlink.SWI
SWI_NADIR_STARE_PSInvestigation of the atmospheric composition (and temperature) of Jupiter and the Galilean moons. This mode is nominally meant for deep integrations and requires numerous repetitions (e.g. monitoring of the moons). Two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding). Position-switch calibration method.SWI
SWI_NADIR_STARE_PS_V1Investigation of the atmospheric composition (and temperature) of Jupiter and the Galilean moons. This mode is nominally meant for deep integrations and requires numerous repetitions (e.g. monitoring of the moons). Two CTS spectra are recorded for 60 seconds over 10000 channels (16 bits coding). Position-switch calibration method.SWI
SWI_OFFAll instrument subsystems including the DPU will be switched off. Consequently there will be no housekeeping data and no telemetry. The instrument will be in this mode during launch and cruise phase, except during calibration campaigns (e.g. planet flybys).SWI
SWI_POINTING_ACSDetermination of absolute pointing offset between S/C and SWI (for the 2 bands) recording continuum maps with the ACS 1 & 2. Integration time on the ACS is 1s.SWI
SWI_POINTING_ACS_CCH: Determination of absolute pointing offset between S/C and SWI (for the 2 bands) recording continuum maps with the ACS 1 & 2 and the CCH 1 & 2.Integration time on the ACS and CCH are 1s and 0.1s, respectively.SWI
SWI_POINTING_CCHDetermination of absolute pointing offset between S/C and SWI (for the 2 bands) recording continuum maps with the CCH 1 & 2. Integration time on the CCH is 0.1s.SWI
SWI_POINTING_CTSDetermination of absolute pointing offset between S/C and SWI (for the 2 bands) recording continuum maps with the CTS 1 & 2. Integration time on the CTS is 1.5s.SWI
SWI_POINTING_CTS_CCHDetermination of absolute pointing offset between S/C and SWI (for the 2 bands) recording continuum maps with the CTS 1 & 2 and the CCH 1 & 2. Integration time on the CTS and CCH are 1.5s and 0.1s, respectively.SWI
SWI_SAFEMode used for USO stabilization prior to warm-up. As it takes several weeks to stabilize the USO, the latter should remain ON all the time in the science phase. Mode into which the instruments switches autonomously in case of an instrument anomaly is detected or if no more science operations are in the queue. Mode to be used during downlink. Only housekeeping telemetry is generated in this mode.SWI
SWI_SCIENCEPlace holder: one of the ASW mode, where the science script will be run ( i.e. from SWI_TSYS_CTS down to SWI_MOON_NADIR_STARE_FS) during the missionSWI
SWI_SPECTRAL_SCAN_ACS_FS_V1Same as SWI SPECTRAL SCAN ACS PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. The ACS does not allow to pre-compute ON/OFF before downlink. A single execution can cover up to 11 tunings.SWI
SWI_SPECTRAL_SCAN_ACS_PS_V1Investigation of the atmospheric composition of Jupiter and the Galilean moons. The whole frequency range available to SWI is scanned. This mode is nominally meant for deep integrations and requires numerous repetitions (e.g. monitoring of the moons). Two ACS spectra are recorded for 60 seconds over 1024 channels. Position-switch calibration method. A single execution can cover up to 16 tunings.SWI
SWI_SPECTRAL_SCAN_CTS_FS_V1Same as SWI SPECTRAL SCAN CTS PS, except a frequency-switch calibration mode is used instead of position-switch. It enables spending  100% of the integration time on-source. If the purity of the spectral band is good enough, there is an option to precompute ON-OFF for the CTS before downlink. A single execution can cover up to 9 tunings.SWI
SWI_SPECTRAL_SCAN_CTS_PS_V1Investigation of the atmospheric composition of Jupiter and the Galilean moons. The whole frequency range available to SWI is scanned. This mode is nominally meant for deep integrations and requires numerous repetitions (e.g. monitoring of the moons). Two CTS spectra are recorded for 60 seconds over 10000 channels (16bit coding). Position-switch calibration method. A single execution can cover up to 13 tunings. Pointing Type: S/C: nadir or limb. Instrument: nadir or limb, using the SWI mechanism if S/C points nadir and to reach the moonsSWI
SWI_STANDBYOnly the instrument DPU will be switched on and be able to accept instrument commands. Only housekeeping telemetry is generated in this mode.SWI
SWI_TSYS_ACS_CCHSpectral scan to measure the system temperature spectra of the 2 bands with the ACS & CCH 1 & 2 by observing the hot load and cold sky. Integration time on ACS is 1 second. A single execution can cover up to 15 tunings.SWI
SWI_TSYS_ACS_CCH_V1Spectral scan to measure the system temperature spectra of the 2 bands with the ACS & CCH 1 & 2 by observing the hot load and cold sky. Integration time on ACS is 1 second. A single execution can cover up to 15 tunings.SWI
SWI_TSYS_ACS_V1Spectral scan to measure the system temperature spectra of the 2 bands with the ACS 1 & 2 by observing the hot load and cold sky. Integration time on ACS is 1 second. A single execution can cover up to 16 tunings.SWI
SWI_TSYS_CCH_V1Spectral scan to measure the system temperature spectra of the 2 bands with the CCH 1 & 2 by observing the hot load and cold sky. A single execution can cover up to 16 tunings.SWI
SWI_TSYS_CTS_V1Spectral scan to measure the system temperature spectra of the 2 bands with the CTS 1 & 2 by observing the hot load and cold sky. Integration time on CTS is 2 seconds. A single execution can cover up to 15 tunings.SWI
SWI_UNLOCKLaunch lock release (on antenna & rocker mechanisms) is allowed only in this mode.SWI
SWI_WARMUPWarm-up mode.SWI

47 observation definitions