View observation definition

History

Mnemonic:

3GM_GRAVITY_TOUR

Name:

3GM_GRAVITY_TOUR

Description:

Gravity measurement during flyby requires the use of the HGA.
KaT and HAA should be operating during gravity measurement
USO assumed to be ON during the full tour: this should be defined in the scenario set-up and not at 3GM observation approach.
HAA should be in CONFIGURATION mode at least 48 hours before the gravity measurement.
The observation should start with 1 hour of HAA in SELF_CALIBRATION mode. KaT starts with 10min of warm-up.
Additional X/X and X/Ka (DST) link may be required whenever the Sun-
Earth-Spacecraft angle is < 60 deg to cancel noise due to the solar wind plasma

Payload:

3GM

Pointing

Pointing Type:

track

Target:

PTRSnippet file:

Advanced

Scheduling Rules:

USO should be ON and scheduled in the background (TO BE SCHEDULED BY SOC AT PLANNING SET-UP)
HAA should be in CONFIGURATION mode and scheduled in the background (TO BE SCHEDULED BY SOC AT PLANNING SET-UP).
If HAA is OFF, HAA needs to be ON at least 48hours before measurement starts.
If outside HGA communication, MGA is used.

any rule that is used to schedule the observation: repetition rules, continuous (plasma instruments), one-off, every orbit, every day, etc

Avoidance Rules:

N/A

conditions that make the observation not possible (e.g. thruster firing)

Comments:

Support Plot 1:

Support Plot 2:

Support Plot 3:

Commanding

ITLSnippet file:

Related segment definitions

	Segmentdefinition
Segment	DL_
Segment	DL_EXT

Power profiles

	Event	Time	Power (Watts)	Comment
Start -01:00:00 17.8 [Watt]	Start	-01:00:00	17.8	This is total power for 3GM instrumentation. Note that USO and HAA are considered always ON in the background. HAA from CONFIGURATION to SELF_CALIBRATION.
Start 00:00:00 51.8 [Watt]	Start	00:00:00	51.8	This is total power for 3GM instrumentation. Note that USO and HAA are considered always ON in the background. HAA from SELF_CALIBRATION to SCIENCE. KAT from OFF to SCIENCE.
End 00:00:00 17.8 [Watt]	End	00:00:00	17.8	This is total power for 3GM instrumentation. Note that USO and HAA are considered always ON in the background. HAA from SCIENCE to CONFIGURATION. KAT from SCIENCE to OFF.

Data profiles

	Event	Time	Data flow	Data Rate (bit/s)	Comment
Start -01:00:00 SELECTOR 50.0 [bit/s]	Start	-01:00:00	SELECTOR	50.0	HAA in SELF_CALIBRATION
Start 00:00:00 SELECTOR 1594.0 [bit/s]	Start	00:00:00	SELECTOR	1594.0	HAA in SCIENCE
End 00:00:00 SELECTOR 50.0 [bit/s]	End	00:00:00	SELECTOR	50.0	HAA in CONFIGURATION

Close Cancel

JSOC Uplink Core System