View observation definition

History

Mnemonic:

SWI_STANDBY

Name:

SWI STANDBY

Description:

Only the instrument DPU will be switched on and be able to accept instrument commands. Only housekeeping telemetry is generated in this mode.

Payload:

SWI

Pointing

Pointing Type:

none

Target:

PTRSnippet file:

Advanced

Scheduling Rules:

Mode entered during software boot. If boot proceeds normally, it switches automatically to SWI SAFE.During the Science Phases, SWI enters this mode when not operating any science observation mode, e.g. during downlink

any rule that is used to schedule the observation: repetition rules, continuous (plasma instruments), one-off, every orbit, every day, etc

Avoidance Rules:

N/A

conditions that make the observation not possible (e.g. thruster firing)

Comments:

#update2022

Support Plot 1:

Support Plot 2:

Support Plot 3:

Commanding

ITLSnippet file:

Related segment definitions

	Segmentdefinition
Segment	E_GPH_OBS
Segment	E_RS_OBS
Segment	E_RS
Segment	E_RS_6E1
Segment	E_RS_7E2
Segment	E_RS_7E1
Segment	E_RS_8E2
Segment	E_GPH
Segment	E_GPH_6E1
Segment	E_GPH_7E2
Segment	E_GPH_7E1
Segment	E_GPH_8E2

Power profiles

	Event	Time	Mode	User Defined Power (Watts)	Comment
Start 00:00:00 User Defined 12.68 [Watt]	Start	00:00:00	User Defined	12.68	12.680 Watts maximum possible value of power consumption

Data profiles

	Event	Time	Mode	User Defined Data Rate (bit/s)	Comment
Start 00:00:00 User Defined 46.0 [bit/s]	Start	00:00:00	User Defined	46.0	Maximum data rate: 0.046kbit/s Minimum data rate: 0.046kbit/s Duration: non relevant

Close Cancel

JSOC Uplink Core System