View observation definition

History

Mnemonic:

SWI_SAFE

Name:

SWI SAFE

Description:

Mode used for USO stabilization prior to warm-up. As it takes several weeks to stabilize the USO, the latter should remain ON all the time in the science phase. Mode into which the instruments switches autonomously in case of an instrument anomaly is detected or if no more science operations are in the queue. Mode to be used during downlink. Only housekeeping telemetry is generated in this mode.

Payload:

SWI

Pointing

Pointing Type:

none

Target:

PTRSnippet file:

Advanced

Scheduling Rules:

Mode entered automatically after software boot. The instrument will be in SWI_SAFE

any rule that is used to schedule the observation: repetition rules, continuous (plasma instruments), one-off, every orbit, every day, etc

Avoidance Rules:

TBD

conditions that make the observation not possible (e.g. thruster firing)

Comments:

#update2022

Support Plot 1:

Support Plot 2:

Support Plot 3:

Commanding

ITLSnippet file:

Related segment definitions

	Segmentdefinition
Segment	E_GPH_OBS
Segment	E_RS_OBS
Segment	E_RS
Segment	E_RS_6E1
Segment	E_RS_7E2
Segment	E_RS_7E1
Segment	E_RS_8E2
Segment	E_GPH
Segment	E_GPH_6E1
Segment	E_GPH_7E2
Segment	E_GPH_7E1
Segment	E_GPH_8E2

Power profiles

	Event	Time	Mode	User Defined Power (Watts)	Comment
Start 00:00:00 User Defined 24.08 [Watt]	Start	00:00:00	User Defined	24.08	maximum possible value of power consumption 24.080 Watts

Data profiles

	Event	Time	Mode	User Defined Data Rate (bit/s)	Comment
Start 00:00:00 User Defined 50.0 [bit/s]	Start	00:00:00	User Defined	50.0	Maximum data rate: 0.050kbit/s Minimum data rate: 0.050kbit/s Duration: non relevant

Close Cancel

JSOC Uplink Core System